Applicable industry: Machine tools (Bearing-less type)
Features
-
・Minumum length type
-
・Applicable for M10 rotor
-
・Body: Stainless steel
-
・Minimize amount of drain by maintaining seal contact (ES20M-T010)
Fluid
<ES20M>
Fluid | Coolant | Oil mist | Dry air |
---|---|---|---|
Pressure (MPa) | ~12 | ~1 | N/A |
Pressure (psi) | ~1,740 | ~145 | |
Pressure (bar) | ~120 | ~10 |
<ESX20M>
Fluid | Coolant | Oil mist | Dry air |
---|---|---|---|
Pressure (MPa) | 0.5~12 | 0.2~1 | N/A |
Pressure (psi) | 72.5~1,740 | 29~145 | |
Pressure (bar) | 5~120 | 2~10 |
Operating specification
Specification |
Flow rate (Coolant) |
Max. speed | Max. temp |
---|---|---|---|
Number | Below 20 L/min | Max. 40,000 min-1 | Max. 60 ℃ |
Below 5.28 gal/min | Max. 40,000 rpm | Max. 140 °F |
Installation direction
Direction | Horizontal | Vertical(Rotating part is upper side) | Vertical(Rotating part is lower side) |
---|---|---|---|
✔ | ✔ | ✔ |
Installation specification
<ES20M>
Specification
|
Rotation without fluid | Min flow rate to operate seal(In case fluid is coolant) | * Thrust loading to spindle side |
---|---|---|---|
N/A | N/A | 550N |
<ESX20M>
Specification | Rotation without fluid | Min flow rate to operate seal(In case fluid is coolant) | * Thrust loading to spindle side |
---|---|---|---|
✔ | Over 10 L/min | 5500N | |
Over 2.64 gal/min |
Note)
* Thrust loading to spindle side
- Thrust loading is directly proportional to fluid pressure.
- In case fluid pressure is 7 MPa (1,015 psi, 70 bar).
Outline drawings and Installation dimensions
※Please download catalog to check details of dimensions
Products
Rotary Joint
- For water and hot water(Applicable industry: General machinery) LC type
- For hot water and heat transfer oil (Applicable industry: General machinery) LCH type
- Clearance seal type MFC type
- Multi-port type (3 ports or more) MF type
- Applicable industry: Rubber and tire NB type
- Applicable industry: Paper V type
- Applicable industry: Steel NJ type
- Applicable industry: Machine tools(Bearing-less type) ESX20M-13060, 61, 62
- Applicable industry: Machine tools (Bearing-less type) ESX20V-L series
- Applicable industry: Machine tools(Bearing-less type) ESX20M-L series
- Applicable industry: Machine tools(Bearing-less type) ESX20M-S&E series
- Applicable industry: Machine tools (Bearing-less type) ESX20M-T series
- Applicable industry: Machine tools(Built-in bearing type) LX84V, 86V series
- Applicable industry: Machine tools (Built-in bearing type) LX84M, 86M series
- Applicable industry: Machine tools (Built-in bearing type) LX88 series (Hexagonal connection)
- Applicable industry: Machine tools (Built-in bearing type) LX88 series (Octagonal connection)
- For turning machine for chuckinhg (Built-in bearing type) LA1P series (Single port)
- For turning machine for chuckinhg (Built-in bearing type) EES-2P03 (Double ports)
- For ball screw cooling (Bearing-less type) ES50 series
- Sludge adherence reduction type (Auto Flush)